Oki ES9160 Maintenance Manual page 205

4.10.4 Offset gate home position sensor (S24)
(1) Take off the paper exit unit.
( P. 4-89 "4.10.2 Paper exit unit")
(2) Disconnect 1 connector, release the latch
and take off the offset gate home position
sensor.
4.10.5 Exit roller
(1) Take off the paper exit unit.
( P. 4-89 "4.10.2 Paper exit unit")
(2) Remove 2 screws and take off the duct.
(3) Release the harness from the harness
clamp.
Remove 1 screw and take off the motor
cover.
Notes:
When installing the motor cover, engage the
shaft of the motor cover and the bearing of
the gear.
© 2012 OKI DATA CORPORATION All rights reserved
Offset gate
home position
sensor
Connector
Fig. 4-255
Fig. 4-256
Gear
Fig. 4-257
4 - 91
Duct
Harness clamp
Motor cover
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4