Advertisement
4.1.13
Right rear cover-1 / Right rear cover-2
(1)
Take off the connecting port cover.
(
P. 4-5 "4.1.12 Connecting port cover").
(2)
Open the transfer cover.
(3)
Release 2 hooks by sliding the right rear
cover to the right side, and then take off the
right rear cover-1[1].
(4)
Remove 1 screw and take off the right rear
cover-2 [1].
4.1.14
Right front cover
(1)
Take off the front cover.
(
P. 4-3 "4.1.6 Rear cover").
(2)
Take off the process unit.
(
P. 4-64 "4.8.1 Process unit").
(3)
Pull out the upper and lower drawers.
(4)
Open the feed cover.
(5)
Remove 2 screws. Release 4 hooks by
sliding the right front cover downward, and
then take off the right front cover by pulling
out toward you.
Remarks:
When installing the right front cover, hang
the 4 hooks of the right front cover on the
frame of the equipment, and then fix it with 2
screws.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Fig. 4-16
Fig. 4-17
Fig. 4-18
© 2012 OKI DATA CORPORATION All rights reserved
4 - 6
[1]
[1]
Right front cover
Advertisement
