Advertisement
[F106_1] ADI-HDD error: HDD type detection error
Classification
Other service call
Check Item
Setting
HDD
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
ADI-HDD error: HDD type detection fails.
If the error is not recovered after rebooting the equipment
or no abnormality is found on any check items for the HDD,
reinstall the master data (HD Data).
•
Connector check
•
Harness check
•
Perform the bad sector check (08-9072).
If the check result is OK, recover the data in the HDD. If
the check result fails, replace the HDD.
•
Check that either the ADI-HDD or SATA-HDD (normal
type) is mounted.
(1) Start the equipment in the 4C mode: [4] + [C] +
[POWER]
(2) Check the type of the HDD shown on the top left of
the control panel display "Current HDD type".
Normal status: ADI-HDD or SATA-HDD
Abnormal status: Unknown HDD
If "Unknown HDD" is displayed, reinstall the master data
(HD Data).
8 - 180
Error item
Measure
© 2012 OKI DATA CORPORATION All rights reserved
Advertisement
