Advertisement
4.9.8
Pressure roller
(1)
Take off the pressure roller unit
(
P. 4-76 "4.9.2 Fuser roller unit / Pressure
roller unit").
(2)
Remove 3 screws and take off the entrance
guide.
(3)
Take off the front cover.
(4)
Disconnect 1 connector, and then take off the
fuse cover while holding a hook.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Pressure roller unit
Fig. 4-234
Fig. 4-235
Hook
Fig. 4-236
© 2012 OKI DATA CORPORATION All rights reserved
4 - 84
Entrance guide
Front cover
Fuse cover
Advertisement
