Oki ES9160 Maintenance Manual page 971

Sub
05/08 Mode Element
element
05 Adjustmen Image Density FAX(black)
t mode Processing adjustment
05 Adjustmen Image Image Setting beam level
t mode Processing conversion(FAX)
05 Adjustmen Image Image Setting beam level
t mode Processing conversion(FAX)
05 Adjustmen Image Image Setting beam level
t mode Processing conversion(FAX)
05 Adjustmen Image Image Setting beam level
t mode Processing conversion(FAX)
05 Adjustmen Image Image Setting beam level
t mode Processing conversion(FAX)
05 Adjustmen Image Blank
t mode Processing page
judgment
threshold
adjustment
05 Adjustmen Image ACS
t mode Processing judgment
threshold
05 Adjustmen Image Stroke PS/PDF automatic
t mode Processing adjustment stroke adjustment
Item Subitem Code
Automatic density 7543
adjustment
FAX 7595
FAX 7595
FAX 7595
FAX 7595
FAX 7595
7618
7630
600dpi 8239
Sub- Default Acceptable
Details
code value value
Photo 128 0~255
0 Beamlevel 0/4 0 0~10
1 Beamlevel 1/4 2 0~10
2 Beamlevel 2/4 3 0~10
3 Beamlevel 3/4 4 0~10
4 Beamlevel 4/4 8 0~10
PPC/SCN 128 0~255
PPC/SCN 70 0~255
0 Default setting 0 0-1
38
RAM Contents
SYS When the value increases, the image becomes darker.
M The smaller the value is, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value is, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value is, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value is, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value is, the narrower the beam width
becomes and the smaller the dots are reproduced.
SYS The larger the value is, the more the original tends to be
judged as a blank page.
SYS The larger the value is, the more an original tends to be
judged as black even at the auto color mode. The
smaller value is, the more it tends to be judged as color.
SYS This code is used to change the width of fine line when
PS and PDF printing. Automatic stroke adjustment is
the function that prevents the width from changing by
position.
This code sets whether the automatic stroke adjustment
is enabled or disabled if automatic stroke adjustment is
not included in the print data. If this setting is disabled,
the case in which the width of fine line becomes thicker
by 1 dot when printed increases.
0: Disabled
1: Enabled
Proce Servic
dure e UI
1 Yes
4
4
4
4
4
1 Yes
1 Yes
4