Advertisement
6.14 Adjustment of the Finisher (MJ-1032)
Notes:
Before performing each adjustment, make sure that all covers (incl. those of the finisher and
equipment) are closed. Otherwise, no power is supplied to the Finisher and the adjustment may
not be performed properly.
6.14.1
Alignment position adjustment
[A] Alignment position adjustment (front)
This adjustment is performed in the Adjustment Mode (05-4822-0) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
[B] Alignment position adjustment (rear)
This adjustment is performed in the Adjustment Mode (05-4822-1) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
6.14.2
Stapling position adjustment
[A] Stapling position adjustment (rear 1-point)
This adjustment is performed in the Adjustment Mode (05-4823-0) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
[B] Stapling position adjustment (rear 1-point / "R" series size)
This adjustment is performed in the Adjustment Mode (05-4823-1) of the equipment.
Adjustment scale
Adjustable range
Adjustment direction
[C] Stapling position adjustment (front 1-point)
This adjustment is performed in the Adjustment Mode (05-4823-2)of the equipment.
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
0.2mm
-3.0 mm to 3.0 mm
Increasing the value
The alignment plate moves to the center.
Decreasing the value The alignment plate moves to the edge of
paper.
0.2mm
-3.0 mm to 3.0 mm
Increasing the value
The alignment plate moves to the center.
Decreasing the value The alignment plate moves to the edge of
paper.
0.2mm
-5.0 mm to 5.0 mm
Increasing the value
The distance between the stapling position
and the edge of the paper becomes longer
Decreasing the value The distance between the stapling position
and the edge of the paper becomes shorter.
0.2mm
-1.0 mm to 5.0 mm
Increasing the value
The distance between the stapling position
and the edge of the paper becomes longer
Decreasing the value The distance between the stapling position
and the edge of the paper becomes shorter.
6 - 80
© 2012 OKI DATA CORPORATION All rights reserved
Advertisement
