Oki ES9160 Maintenance Manual page 131

Notes:
1. When installing, be sure that the harness
[1] of the APS sensor comes over the
lens unit [2].
2. See 6.9.2 for the adjustment procedure.
3. Do not touch the 8 screws shown with the
arrows when replacing the lens unit.
4. Handle the unit with care. Do not touch
the adjusted area and lens. (Hold the unit
as shown in the right figure.)
© 2012 OKI DATA CORPORATION All rights reserved
[2]
Fig. 4-44
Fig. 4-45
Fig. 4-46
4 - 17
[1]
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4