Oki ES9160 Maintenance Manual page 208

Notes:
When installing the solenoid, check if the
solenoid is installed at the center of the
scale. (The scale is longer in the center.).
4.10.8 Reverse sensor (S23)
(1) Take off the reverse unit.
( P. 4-88 "4.10.1 Reverse unit")
(2) Remove 3 screws and take off the plate.
Notes:
When installing, engage the slit of the
reverse gate solenoid and the lever of the
gate.
(3) Disconnect 1 connector, release the latch,
and take off the reverse sensor.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Fig. 4-264
Plate
Fig. 4-265
Reverse sensor
Connector
Fig. 4-266
© 2012 OKI DATA CORPORATION All rights reserved
4 - 94
Window
Center
Reverse gate solenoid
Reverse unit
Lever
Slit