Oki ES9160 Maintenance Manual page 360

[B] Adjusting carriages-1 and -2 positions
<Procedure>
(1) Move the carriage-2 toward the exit side.
(2) Loosen the screws fixing the front side pulley bracket, make the sections A and B of the carriage-
2 touch with the inside of the exit side frame and screw them up.
[Rear]
(3) Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit
side frame and screw up the front/rear sides of the bracket to fix it.
Notes:
Make sure that the sections A and B of the carriage-2 touch with the exit side frame.
[Rear]
Bracket
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
Carriage-2
B
Fig.6-33
Carriage-1
Fig.6-34
6 - 52
Pulley bracket
[Front]
Exit side frame
A
[Front]
Exit side frame
Bracket
© 2012 OKI DATA CORPORATION All rights reserved