6.4.2
Density adjustment
The center density and the density variation controlled by density adjustment keys can be adjusted as
follows.
Original mode
Text/
Photo
Text
Photo
7114
7116
7115
7117
7119
7118
7120
7122
7121
7123
7125
7124
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment using the following procedure.
<Procedure>
(1)
While pressing [0] and [5] simultaneously, turn the power ON.
(2)
Key in a code and press the [START] button.
(3)
Key in an adjustment value.
(To correct the keyed-in value, press the [CLEAR] button.)
(4)
Press the [OK] or [INTERRUPT] button to store the value.
ready state.
(5)
Press the [FAX] button and then the [START] button. Then perform test copying.
(6)
If the desired image density has not been attained, repeat step (1) to (5).
© 2012 OKI DATA CORPORATION All rights reserved
Color
Item to be adjusted
User
Docume
Custom
nt
7258
7126
Manual density mode
center value
7261
-
Manual density mode
light step value
7264
-
Manual density mode
dark step value
7267
7129
Automatic density
mode
6 - 23
< Adjustment Mode (05) >
Remarks
The larger the value is, the
darker the image becomes.
Acceptable values: 0 to 255
(Default: 128)
The larger the value is, the
lighter the light side becomes.
Acceptable values: 0 to 255
(Default: 20)
The larger the value is, the
darker the dark side
becomes.
Acceptable values: 0 to 255
(Default: 20)
The larger the value is, the
darker the image becomes.
Acceptable values: 0 to 255
(Default: 128)
The equipment goes back to the
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6