Error code
Classification
EA40
Finisher jam
(Finisher section)
EA50
EA60
EA70
EA80
Finisher jam
(Saddle Stitcher
section)
EA81
EA90
EAA0
EAB0
EAB1
EAC1
EAD0
Other jam
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
Contents
Cover open error:
The front cover or stationary tray cover is opened
during paper transport. [MJ-1101/MJ-1106]
Finisher cover open jam:
(1) A paper jam occurs when any of the covers is
opened during the transporting of paper in the
Finisher (until the paper exit is completed after the
B command has been received).
(2) A paper jam occurs when the supplying of the
voltage of 24V is stopped during the transporting of
paper. [MJ-1032/MJ-1033]
Stapling jam: Stapling is not performed properly.
[MJ-1032/MJ-1033]
Early arrival jam: A paper jam occurs because
paper from the equipment arrives at the Finisher
too early. [MJ-1032/MJ-1033]
Stack exit belt home position error: The stack exit
belt is not at the home position. [MJ-1101/MJ-1106]
Stapling jam: Stapling is not performed properly.
[MJ-1032/MJ-1033]
The detection of the home position of the saddle
stitch 3rd transport roller drive motor ends
abnormally.
Door open jam: The delivery cover or inlet cover
has opened during printing. [MJ-1106]
Paper remaining in Saddle Stitch Finisher: Paper
remaining in Saddle Stitch Finisher [MJ-1106]
Paper transport jam in Saddle Stitch Finisher:
Paper transport jam in Saddle Stitch Finisher
[MJ-1106]
Short paper jam: Short paper jam (Saddle Stitch
Finisher) [MJ-1106]
The detection of the home position of the folding
blade motor ends abnormally.
Print end command time-out jam: The printing has
not finished normally because of the
communication error between the SYS board and
LGC board at the end of printing.
8 - 8
Troubleshooting
© 2012 OKI DATA CORPORATION All rights reserved
P. 8-96
P. 8-96
P. 8-97
P. 8-98
P. 8-98
P. 8-100
-
P. 8-100
P. 8-101
P. 8-101
P. 8-103
-
P. 8-75