Oki ES9160 Maintenance Manual page 145

4.5.5 Paper stock sensor (S15/S18)
(1) Take off the drawer feeding unit
( P. 4-29 "4.5.2 Drawer feeding unit").
(2) Pull up the paper stock sensor arm.
(3) Disconnect the connector and release the 3
latches to take off the paper stock sensor.
4.5.6 Separation roller
(1) Take off the drawer feeding unit
( P. 4-29 "4.5.2 Drawer feeding unit").
(2) Remove 1 screw and take off the separation
roller holder.
(3) Detach the lever from the holder and take off
the separation roller with the shaft.
© 2012 OKI DATA CORPORATION All rights reserved
Fig. 4-82
Separation roller holder
Fig. 4-83
Separation roller
Fig. 4-84
4 - 31
Paper stock sensor
Lever
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4