Advertisement
(3)
Take off the front lower cover (for adjusting
the caster of the equipment side).
(MJ-1033 Service Manual
P.4-9 "[K] Front lower vocer")
(4)
Take off the lower cover (for adjusting the
caster of the movable tray side).
(MJ-1033 Service Manual
P.4-10 "[L] Lower cover")
(5)
Loosen the locking nut [4] of the caster with
the wrench by turning it clockwise.
(6)
Turn the height adjustment nut [5] of the caster with the wrench to adjust the height of the
Finisher.
Direction to turn the height adjustment nut
Clockwise
Counterclockwise
(7)
The height increases or decreases 1.75 mm
for one turn of the height adjustment nut.
© 2012 OKI DATA CORPORATION All rights reserved
Fig.6-94
[4]
Fig.6-95
Height of the Finisher
Becomes higher.
Becomes lower.
[5]
Fig.6-96
6 - 87
[4]
[4]
[4]
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6
Advertisement
