Advertisement
4.7.15
Transfer roller
(1)
Take off the transfer roller unit
(
P. 4-61 "4.7.14 Transfer roller unit").
(2)
Release 4 hooks and then take off the
transfer roller.
Notes:
Be careful not to drop the spring.
(3)
Remove 1 gear, 2 guide rollers and 2
bushings from the transfer roller.
Notes:
When installing the bushings and gear, pay
attention to the direction of them.
4.7.16
Separation needle
(1)
Take off the transfer roller unit.
(
P. 4-61 "4.7.14 Transfer roller unit").
(2)
Release 2 hooks and then take off the cover.
(3)
Take off the separation needle paying
attention not to deform it.
Notes:
When installing the separation needle, be
sure to insert it underneath the power supply
plate.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Transfer roller
Fig. 4-171
Transfer roller
Bushing
Guide roller
Fig. 4-172
Separation needle
Fig. 4-173
© 2012 OKI DATA CORPORATION All rights reserved
4 - 62
Gear
Guide roller
Bushing
Power supply plate
Cover
Advertisement
