(12) Attach the harness to 1 connector and then
install the clamp in the equipment.
(13) Fix the harness with 2 clamps.
(14) Install the original glass.
Notes:
When installing, fit 2 small protrusions of the
original glass in the groove of the equipment
and fix the original glass with the fixing
bracket by pushing it to the left rear direction.
(15) Install the fixing bracket with 2 screws.
© 2012 OKI DATA CORPORATION All rights reserved
1
Fig. 4-366
Fig. 4-367
Fixing bracket
Fig. 4-368
4 - 129
2
Original glass
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4