Advertisement
6.3.3
Printer related adjustment
The printer related adjustment is performed by using the printed out grid pattern.
1
Adjustment
Tolerance
A
200 ± 0.5mm
B
52 ± 0.5mm
C
200 ± 0.5mm
D
52 ± 0.5mm
E
52 ± 0.5mm
ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
A
6
B, E
Fig.6-9 Grid pattern
P. 6-9 "[A] Reproduction ratio of primary scanning direction (Fine adjustment of
polygonal motor rotation speed (Printer))"
P. 6-9 "[B] Primary scanning data laser writing start position (Printer)"
P. 6-10 "[C] Reproduction ratio of secondary scanning direction (Fine
adjustment of main motor rotation speed (Copier/Printer))"
P. 6-11 "[D] Secondary scanning data laser writing start position"
P. 6-12 "[E] Primary scanning data laser writing start position at duplexing"
6 - 8
21
Detail of adjustment
© 2012 OKI DATA CORPORATION All rights reserved
Advertisement
