Advertisement
(6)
Remove 1 screw and raise the laser optical
unit to take it off.
Notes:
When removing and installing the laser
optical unit, be careful not to deform the leaf
spring.
(7)
Release the catch of the leaf spring and then
remove it from the laser optical unit.
Notes:
1. Do not leave fingerprints or stain on the
slit glass of the laser optical unit.
2. Pay close attention not to make an impact
or vibration on the laser optical unit
because it is a precise apparatus.
3. Place the removed laser optical unit so as
not to load on the polygonal motor.
4. Do not disassemble the laser optical unit
in the field because it is precisely
adjusted and very sensitive to dust and
stain.
5. Hold the laser optical unit vertically. Do
not press the top of the unit where the
polygonal motor is installed with your
hands or other things.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Leaf spring
Leaf spring
Slit glass
© 2012 OKI DATA CORPORATION All rights reserved
4 - 28
Laser optical unit
Fig. 4-74
Laser optical unit
Fig. 4-75
Fig. 4-76
Advertisement
