Advertisement
(4)
Detach the cover, arbor and clutch spring
from the shaft, and then take off the
separation roller.
4.5.7
Feed roller
(1)
Take off the separation roller holder
(
P. 4-31 "4.5.6 Separation roller").
(2)
Remove the clip and take off the feed roller.
4.5.8
Pickup roller
(1)
Take off the drawer feeding unit
(
P. 4-29 "4.5.2 Drawer feeding unit").
(2)
Press the pickup roller and lift the rear pickup
arm.
(3)
Slide the pickup roller assembly to the rear
side, and take off the front shaft from the
pickup arm.
(4)
Take off the timing belt and then the pickup
roller assembly.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Cover
Clutch spring
Arbor
Separation roller
One-way clutch
Feed roller
Clip
Pickup arm
© 2012 OKI DATA CORPORATION All rights reserved
4 - 32
Shaft
Arbor
Fig. 4-85
Fig. 4-86
Pickup roller assembly
Timing belt
Fig. 4-87
Advertisement
