(9)
Rotate the pulley to move the carriage to the
paper exit side.
(10) Install the Scanner Damp Heater (Left) with 2
screws.
(11) Install the Scanner Damp Heater (Left) in the
cutout of the frame in the equipment as
shown in the right-hand figure.
Fix the Scanner Damp Heater (Left) with 1
screw and then insert 1 connectors.
Notes:
Check that no harnesses will be caught by
moving the carriage.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Carriage
© 2012 OKI DATA CORPORATION All rights reserved
4 - 128
Fig. 4-363
Scanner Damp
Heater (Left)
Fig. 4-364
Fig. 4-365