Advertisement
3.14.2
Functions
1. Exit motor (M10)
The exit motor is a stepping motor which drives the exit roller.
2. Exit roller
The exit roller transports the paper from the fuser unit to the inner tray. This roller is driven by the
exit motor.
The exit roller has the offset function.
3. Reverse sensor (S23)
The reverse sensor detects if the leading edge of the paper from the paper exit section has reached
to the exit roller. This sensor is also used for the detection of a paper jam in the reverse section, and
the detection of the trailing edge of the reversed paper at duplex printing as well.
4. Reverse motor (M14)
The reverse motor is a stepping motor which drives the reverse roller, however, this motor rotates
reversely to switchback when the paper is transported to the upper exit area.
5. Reverse roller
The reverse roller transports the paper from the paper exit section to the job separator (MJ-5006) or
ADU. This roller is driven by the reverse motor.
6. Offset gate motor (M13)
This offset gate motor drives the offset gate and shift the paper exit position back and forth.
7. Offset gate home position sensor (S24)
This offset gate home position sensor detects if the offset gate driven is back in the home position.
8. Reverse gate solenoid (SOL1)
This reverse gate solenoid drives the reverse gate and switches the paper transport path (exit
section of reverse section).
© 2012 OKI DATA CORPORATION All rights reserved
3 - 63
ES9160 MFP / ES9170 MFP
OUTLINE OF THE MACHINE
3
Advertisement
