Advertisement
8.2.8
Network error
Message displayed in the
Error code
TopAccess screen
8000
Static IPv4 duplicated address
detected
8011
Link Local address of IPv6 was
duplicated.
8012
Manual address of IPv6 was
duplicated.
8013
Stateless address of IPv6 was
duplicated.
8014
Stateful address of IPv6 was
duplicated.
8021
-
8022
Authentication Failure
8023
Can not contact Authentication
Server/Switch
8024
Certificate verification Failure
8031
No IKE proposal chosen
8032
IKE Certificate Authentication
failed
8033
IKE Pre-shared key
Authentication failed
8034
Invalid Certificate
8035
Certificate Type unsupported
8036
Invalid certificate authority
8037
Certificate unavailable
8038
No ISAKMP SA established
8039
Invalid Signature
No IKEv2 proposal chosen
803A
803B
IKEv2 Certificate Authentication
failed
803C
IKEv2 Secret key Authentication
failed
803D
Falling Back to IKEv1
803E
ISAKMP SA unusable (deleted)
803F
Crypto operation failed
Invalid key information
8040
© 2012 OKI DATA CORPORATION All rights reserved
Contents
IPv4 address overlaps.
Linklocal Address Conflict
Manual IPv6 Address Conflict
Stateless Address Conflict
Stateful Address Conflict
Used to delete error message on
panel.
Failed in 802.1X authentication.
Failed in connection to
authentication server and switch.
Failed in verification of certificate.
Ipsec error for ikev1 certification
failed
Ipsec error for wrong proposal
choosen
Ipsec error if auth for shared key
failed
Ipsec error if invalid certificate
uploaded
Ipsec error if certificate not
supported
Ipsec error if invalid certificate
authentication
Ipsec error if certificate are not
avialable
Ipsec error for SA is not present
Ipsec error for invalid signaturer
for certificate
Ipsec error is proposal choosen is
wrong
Ipsec error for ikev2 certification
failed
Ipsec error for ikev2 if secret key
auth failed
Ipsec error if peer dosent support
IKEv2 and falling back to IKEv1
Ipsec error if ISAKMP SA is not
created of destroyed due to some
uncertain condition
Ipsec error for ikev2 if crypto
operation failed
Ipsec error for ikev2 if key info is
invalid
ERROR CODE AND TROUBLESHOOTING
8 - 35
Troubleshooting
P. 8-251
P. 8-251
P. 8-251
P. 8-251
P. 8-251
-
P. 8-251
P. 8-251
P. 8-252
P. 8-252
P. 8-252
P. 8-252
P. 8-252
P. 8-252
P. 8-253
P. 8-253
P. 8-253
P. 8-253
P. 8-253
P. 8-254
P. 8-254
P. 8-254
P. 8-254
P. 8-254
P. 8-255
ES9160 MFP / ES9170 MFP
8
Advertisement
