Message displayed
SRAM Key
FROM Key
Status
Status
KeyNull
OK
KeyBroken
KeyMismatch
KeyMismatch
AccessFailed
AccessFailed
KeyNull
AccessFailed
KeyBroken
AccessFailed
KeyNull
KeyBroken
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
(1)
Recover the encryption key on the SRAM board.
P. 9-20 "9.2.8 Precautions and Procedures when
replacing SRAM board"
<The error occurs when the SYS board is replaced>
(1)
Recover the encryption key on the SYS board.
P. 9-14 "9.2.4 Precautions and Procedures when
replacing the SYS board"
<The error occurs except when the SYS board is replaced>
(1)
Recover the encryption key on the SRAM board.
P. 9-20 "9.2.8 Precautions and Procedures when
replacing SRAM board"
<With USB-SRAM backup data: USB backup data recovery>
(1)
Replace the SYS board.
P. 9-14 "9.2.4 Precautions and Procedures when
replacing the SYS board"
(2)
Replace the SRAM board (for the SYS board). (USB
backup data are used)
P. 9-20 "9.2.8 Precautions and Procedures when
replacing SRAM board"
(3)
Recover the encryption key/license on the SYS board.
P. 9-14 "9.2.4 Precautions and Procedures when
replacing the SYS board"
([D]Restore encryption key, [E] Restore license)
<With USB-SRAM backup data: USB backup data recovery>
(1)
Replace the SYS board.
P. 9-14 "9.2.4 Precautions and Procedures when
replacing the SYS board"
(2)
Recover all data on the SRAM board.
P. 9-20 "9.2.8 Precautions and Procedures when
replacing SRAM board"
"[D] Restore SRAM" step (6) to (10)
(3)
Recover the encryption key/license on the SYS board.
P. 9-14 "9.2.4 Precautions and Procedures when
replacing the SYS board"
([D] Restore encryption key, [E] Restore license)
<With USB-SRAM backup data: USB backup data recovery>
(1)
Install the OS data.
P. 11-9 "11.2.1 Master data/System ROM/Engine
ROM/Scanner ROM / RADF ROM"
(2)
Replace the SRAM board (for the SYS board). (USB
backup data are used)
P. 9-20 "9.2.8 Precautions and Procedures when
replacing SRAM board"
(3)
Recover the encryption key/license on the SYS board.
P. 9-14 "9.2.4 Precautions and Procedures when
replacing the SYS board"
([D] Restore encryption key, [E] Restore license)"
8 - 184
Measure
([G] Backup encryption key)
([D] Restore encryption key)
([G] Backup encryption key)
(all procedure)
(all procedure)
(all procedure)
(all procedures)
© 2012 OKI DATA CORPORATION All rights reserved