Advertisement
Account Codes ........................ 10,000 codes
Department Codes .................. 1,000 codes
Warming-up time ..................... Approx. 20 sec. (temperature: 20°C)
Power requirements ................ AC 110 V / 13.2 A, 115 V or 127 V / 12 A
* The acceptable value of each voltage is ±10%.
Power consumption................. 1.5 kW or less (115 V series, 200 V series)
* The electric power is supplied to the RADF, (ADU), Finisher, Job Separator, Offset Tray, PFP and
LCF through the equipment.
Total counter............................ Electronical counter
Dimensions of the equipment............ See the figure below (W 575 x D 586 x H 756 (mm))
* The height includes the surface of the original glass.
* When the tilt angle of the control panel is 7 to 84 degrees.
756
Weight ..................................... Approximately 61 kg (134.48 lb.): include the developer material and
© 2012 OKI DATA CORPORATION All rights reserved
220-240 V or 240 V / 8 A (50/60 Hz)
Super Sleep mode: 1 W or less (When the damp heater switch is set to
OFF, and only 1 FAX line is used)
586
575
Fig. 2-1
drum
2 - 3
7-84°
ES9160 MFP / ES9170 MFP
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
2
Advertisement
