(1)
Push in a new oil seal parallel to the
mounting hole section of the developer frame
or outside of the holder.
* Pay attention to the direction in which the
oil seal is attached. (See figure on right.)
(2)
Apply an even coat of grease to the inside of
the oil seal.
•
Amount: About two small drops
(3)
Wipe off any grease the exudes from the
inside.
ES9160 MFP / ES9170 MFP
PREVENTIVE MAINTENANCE (PM)
Inside
© 2012 OKI DATA CORPORATION All rights reserved
7 - 26
Developer frame
(Nozzle mixer)
Outside
Grease
Oil seal
Fig. 7-16