Oki ES9160 Maintenance Manual page 112

<<Output connector>>
Not linked with the door switch
Connector
CN418 For the SYS board
CN415 For the LGC board, FUS board, PFP/LCF (via LGC
board), Bridge unit / Job separator / Offset tray (via
LGC board), finisher
CN419 For the SLG board, RADF
Linked with the door switch
Connector
CN415 For the LGC board, High-voltage transformer (via
LGC board), PFP/LCF (via LGC board), Bridge unit /
Job separator / Offset tray (via LGC board), finisher
CN417 For the Main motor, MOT/MOT2 board
CN419 For the SLG board, RADF
ES9160 MFP / ES9170 MFP
OUTLINE OF THE MACHINE
Destination
Destination
3 - 74
Voltage
+5VS, +5VA, +5VB, +12VA
+5VB
+5VB, +12VB
Voltage
+5VD, +24VD1, +24VD4
+24VD2
+24VD1, +24VD3
© 2012 OKI DATA CORPORATION All rights reserved