Oki ES9160 Maintenance Manual page 158

4.5.25 Upper tray-up motor (M11)
(1) Pull out the upper drawer.
(2) Take off the rear cover.
P. 4-3 "4.1.6 Rear cover"
(3) Disconnect 1 connector and take off the
harness clamp from the bracket.
(4) Remove 2 screws and take off the upper
tray-up motor along with the bracket.
(5) Remove 2 screws and take off the upper
tray-up motor from the bracket.
Notes:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the motor
could be damaged.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Bracket
© 2012 OKI DATA CORPORATION All rights reserved
4 - 44
Fig. 4-120
Fig. 4-121
Upper drawer tray-up motor
Fig. 4-122