Oki ES9160 Maintenance Manual page 129

(3) Disconnect 1 connector and remove 1 screw
for each APS sensor. Take off 3 APS
sensors.
4.3.4 Exposure lamp
(1) Take off the original glass.
P. 4-13 "4.3.1 Original glass"
(2) Take off the front upper cover.
P. 4-1 "4.1.2 Front upper cover"
(3) Rotate the drive pulley and move the
carriage-1 so that the screw can be seen.
(4) Remove 1 screw. Lift up the front side of the
exposure lamp [1] and take off by sliding it.
© 2012 OKI DATA CORPORATION All rights reserved
Fig. 4-38
Fig. 4-39
Fig. 4-40
4 - 15
Latch
[1]
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4