Advertisement
11.5.1
Scanner ROM
Important:
•
Be sure to shut down the equipment before installing and removing the download jig.
•
Do not shut down the equipment during the update. The data could be damaged and not be
able to be operated properly.
[A] Update Procedure
(1)
Install the ROM to the download jig (K-PWA-DLM-320).
Make sure the direction is correct.
(2)
Press the [ON/OFF] button on the control panel to shut down the equipment and turn the power
OFF using the main power switch.
(3)
Take off the right upper cover.
(4)
Take off the cover plate.
© 2012 OKI DATA CORPORATION All rights reserved
Right upper
cover
Fig.11-33
Cover plate
Fig.11-34
11 - 39
ES9160 MFP / ES9170 MFP
FIRMWARE UPDATING
11
Advertisement
