Advertisement
[ 4 ] Bypass feed copying
1. Insert a sheet of paper into the bypass tray.
→ Bypass paper sensor ON
-
"Ready for bypass feeding" is displayed.
2. Press the [START] button
→ "Ready for bypass feeding" changes to "COPYING"
→ Exposure lamp ON
→ Scan motor ON → Carriages -1 and -2 move forward
→ Polygonal motor rotates in high speed
→ Main motor and exit motor ON
-
The drum, fuser unit, developer unit and exit roller are driven.
3. Bypass feeding
→ Main charger, developer bias and discharge LED ON. Fans are rotated in high speed.
→ Bypass feed clutch ON
-
The bypass feed roller start to rotate.
→ Aligning operation
→ Paper reaches the registration roller
→ After a certain period of time, the bypass feed clutch OFF
4. Hereafter, the operation 3) through 6) of
feeding)" is repeated.
[ 5 ] Interruption copying
1. Press the [INTERRUPT] button
→ LED "INTERRUPT" ON
→ Copying operation in progress is temporarily stopped. Carriages -1 and -2 return to appropriate
positions.
→ "Job interrupted job 1 saved" is displayed.
→ Automatic density and reproduction ratio 100% are set (The set number remains the same)
2. Select the desired copy condition
3. After the interruption copying is finished:
→ LED "INTERRUPT" OFF by pressing the [INTERRUPT] button
→ Equipment returns to the status before the interruption
→ "Ready to resume job 1" is displayed
4. Press the [START] button
→ The copying operation before the interruption is resumed.
© 2012 OKI DATA CORPORATION All rights reserved
P. 3-20 "[ 3 ] Drawer feed copying (Upper drawer paper
3 - 21
ES9160 MFP / ES9170 MFP
OUTLINE OF THE MACHINE
3
Advertisement
