Advertisement
(3)
Release the harness from the harness clamp
and pull out the discharge LED.
4.7.4
Main charger
(1)
Take off the discharge LED unit
(
P. 4-54 "4.7.3 Discharge LED").
(2)
Pull out the main charger and take it off by
sliding it to the rear side.
Notes:
Be careful not to touch or scratch the drum
surface at this time.
4.7.5
Main charger grid
(1)
Take off the main charger
(
P. 4-55 "4.7.4 Main charger").
(2)
Remove the spring and take off the main
charger grid.
Notes:
Do not touch the mesh area of the grid.
© 2012 OKI DATA CORPORATION All rights reserved
Fig. 4-152
Fig. 4-153
Main charger grid
Fig. 4-154
4 - 55
Discharge LED
Main charger
Spring
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4
Advertisement
