Oki ES9160 Maintenance Manual page 80

3.9.4 Operation
[ 1 ] Bypass feeding mechanism
Paper on the bypass tray becomes ready for being fed when the paper holding lever is laid down to a
side on which paper is placed (the equipment side).
When the paper holding lever is laid down to the equipment side, the paper holding guide lifts up the
paper as shown in the figure so as to contact the paper with the bypass feed roller.
Then the paper is fed along with the rotation of the bypass feed roller.
The bypass separation pad prevents more than one sheet of paper from being fed simultaneously.
ES9160 MFP / ES9170 MFP
OUTLINE OF THE MACHINE
Bypass feed roller
(Bypass feed clutch)
Paper holding guide
Separation pad
Fig. 3-26
3 - 42
Paper holding lever
Paper
© 2012 OKI DATA CORPORATION All rights reserved