Advertisement
Error code
Classification
ED10
Finisher jam
(Finisher section)
ED11
ED12
ED13
ED14
ED15
ED16
EF10
EF11
EF12
EF13
EF14
EF15
EF16
EF17
EF18
EF19
EF1A
EF1B
EF1C
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
Contents
Skew adjustment motor (M1) home position
detection abnormality: The Skew adjustment motor
is not at the home position. [MJ-1101/MJ-1106
(when MJ-6103 is installed)]
Sideways adjustment motor (M2) home position
detection error: The Sideways adjustment motor is
not at the home position. [MJ-1101/MJ-1106 (when
MJ-6103 is installed)]
Shutter home position error: The shutter is not at
the home position. [MJ-1101/MJ-1106]
Front alignment plate home position error: The front
alignment plate is not at the home position. [MJ-
1101/MJ-1106]
Rear alignment plate home position error: The rear
alignment plate is not at the home position. [MJ-
1101/MJ-1106]
Paddle home position error: The paddle is not at the
home position. [MJ-1101/MJ-1106]
Buffer tray home position error: The buffer tray is
not at the home position. [MJ-1101/MJ-1106]
Paper not supported for Saddle Stitch Finisher:
Unsupported paper size, type and an excess
number of pages for stapling are selected. [MJ-
1106]
Saddle Stitch Finisher stapling error (front): Front
stapling is not correctly done. [MJ-1106]
Saddle Stitch Finisher stapling error (rear): Rear
stapling is not correctly done. [MJ-1106]
Saddle paper holder home position detection
abnormality: The paper holder home position
cannot be detected. [MJ-1106]
Saddle paper exit jam: Outputting paper is not
completed within a fixed time. [MJ-1106]
Saddle Stitch Finisher side alignment motor home
position detection abnormality: The side alignment
motor home position cannot be detected. [MJ-1106]
Saddle Stitch Finisher stacker motor home position
detection abnormality: The stacker motor home
position cannot be detected. [MJ-1106]
Saddle Stitch Finisher folding blade home position
detection abnormality: The folding blade home
position cannot be detected. [MJ-1106]
Saddle Stitch Finisher additional folding roller home
position detection abnormality: The additional
folding roller home position cannot be detected.
[MJ-1106]
Saddle paper folding jam: Fold processed paper
cannot be transported to the additional folding
roller. [MJ-1106]
The trailing edge of the paper passed the entrance
path sensor on the Finisher unit transport path.
After the switchback, the paper is transported to the
saddle stitch unit transport path, but does not reach
the saddle stitch entrance path sensor.
Paper remains at the saddle stitch positioning
paper exit sensor for a longer period than specified
while being transported in the pushing/folding
operation. [MJ-1033]
Paper is transported in the pushing/folding
operation, but does not reach the saddle stitch exit
path sensor.
8 - 10
Troubleshooting
© 2012 OKI DATA CORPORATION All rights reserved
P. 8-105
P. 8-106
P. 8-106
P. 8-107
P. 8-108
P. 8-109
P. 8-110
P. 8-111
P. 8-111
P. 8-112
P. 8-112
P. 8-112
P. 8-113
P. 8-114
P. 8-114
P. 8-115
P. 8-115
-
P. 8-116
P. 8-113
Advertisement
