Oki ES9160 Maintenance Manual page 207

(4) Remove 2 screws and take off the reverse
motor.
4.10.7 Reverse gate solenoid (SOL1)
(1) Take off the reverse unit.
( P. 4-88 "4.10.1 Reverse unit")
(2) Remove 3 screws and take off the plate.
Notes:
When installing, engage the slit of the
reverse gate solenoid and the lever of the
gate.
(3) Release the harness from the harness
clamp.
(4) Disconnect 1 connector and remove 2
screws, and take off the reverse gate
solenoid.
© 2012 OKI DATA CORPORATION All rights reserved
Fig. 4-261
Plate
Fig. 4-262
Reverse gate solenoid
Harness clamp
Fig. 4-263
4 - 93
Reverse motor
Reverse unit
Lever
Slit
Connector
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4