Advertisement
(3)
Take off the auto-toner sensor by rotating it.
4.8.7
Drum thermistor (THMS4)
(1)
Remove the developer material
(
P. 4-65 "4.8.3 Removing developer
material").
(2)
Disconnect 1 connector, remove 1 screw and
take off the drum thermistor.
4.8.8
Guide roller / Developer sleeve
(1)
Remove the developer material
(
P. 4-65 "4.8.3 Removing developer
material").
(2)
Remove 2 screws and take off the recovered
toner supply unit.
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
Auto-toner sensor
Fig. 4-186
Drum thermistor
Connector
Fig. 4-187
Fig. 4-188
© 2012 OKI DATA CORPORATION All rights reserved
4 - 68
Recovered toner
supply unit
Advertisement
