Advertisement
4.5.26
Upper drawer detection switch (SW6)
(1)
Pull out the upper drawer.
(2)
Take off the rear cover.
P. 4-3 "4.1.6 Rear cover"
(3)
Disconnect 1 connector and then take off the
upper drawer detection switch.
4.5.27
Hi-speed clutch (CLT6) / Low-speed clutch(CLT7)
(1)
Take off the rear cover.
P. 4-3 "4.1.6 Rear cover"
(2)
Remove 1 clip and then take off the bushing.
(3)
Remove 3 screws and then take off the
bracket.
© 2012 OKI DATA CORPORATION All rights reserved
Upper drawer detection switch
Fig. 4-123
Bushing
Clip
Fig. 4-124
Bracket
Fig. 4-125
4 - 45
ES9160 MFP / ES9170 MFP
DISASSEMBLY AND REPLACEMENT
4
Advertisement
