Advertisement
Proce
Check item
dure
2
Is the OCT feed sensor
working?
(Perform the input check
in the test mode: 03-
[FAX]ON/[3]/[G])
3
PC board
Parts to be replaced
OCT feed sensor
OCT board
LGC board
© 2012 OKI DATA CORPORATION All rights reserved
Result
Yes
No
•
Check if the connector of the OCT feed
sensor is disconnected.
•
Check if either of the connectors CN260 or
CN262 on the OCT board is disconnected.
•
Check if the connector CN302 on the LGC
board is disconnected.
•
Check if the connector pins are
disconnected and the harnesses are open
circuited.
•
Check if the conductor patterns on the OCT
board and LGC board are short circuited or
open circuited.
•
Replace the OCT feed sensor.
•
Replace the OCT board.
•
Replace the LGC board.
•
Replace the OCT board.
•
Replace the LGC board.
8 - 85
Measure
Remark
ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
Next
Step
3
8
Advertisement
