Allied Telesis IE340 Series Command Reference Manual page 157

F C M
ILE AND ONFIGURATION ANAGEMENT
CRYPTO VERIFY
Default No default
Mode Global Configuration
Usage notes All models of a particular series run the same firmware file and therefore have the
same checksum for that firmware file. For example, all x930 Series switches have
the same checksum.
If your network has extremely strict security requirements, such as FIPS
compliance, you may need to verify the bootloader on boot-up and use signature
verification for the firmware file. To configure these, use the commands
verify bootrom
upgrade the bootloader or firmware, so only use them if necessary.
Examples To verify the firmware file for 5.5.3-0.1 on an x930 Series switch, use the commands:
awplus#
awplus(config)#
7f22d8a30c991a4ddc0a2aed47246282b23b4e4a865e07f79795c0959c47de
78
Related crypto secure-mode
commands
crypto verify bootrom
crypto verify signed
show hash
show secure-mode
Command Version 5.5.3-0.1: gui parameter added; <filename> parameter expanded to cover
changes all file types
C613-50631-01 Rev A
C
OMMANDS
and crypto verify
configure terminal
crypto verify x930-5.5.3-0.1.rel
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
signed. These commands make it difficult to
crypto
157