VLAN C
OMMANDS
-
SHOW VLAN ACCESS
MAP
show vlan access-map
Overview
Use this command to display information about the configured VLAN
access-maps. VLAN access-maps contain a series of ACLs and enable you to filter
traffic ingressing specified VLANs.
show vlan access-map [<name>]
Syntax
Mode
User Exec/Privileged Exec
Example
To display the ACLs in all access-maps, use the command:
awplus#
Output
Figure 16-4: Example output from show vlan access-map
Related
vlan access-map
Commands
Command
Version 5.4.6-2.1: command added
changes
C613-50170-01 Rev B
Parameter
Description
<name>
The name of the access-map to display.
show vlan access-map
awplus#show vlan access-map
Vlan access map : deny_all
Hardware MAC access list 4000
10 deny any any
Vlan access map : ip_range
Hardware IP access list 3000
10 deny ip 192.168.1.1/24 any
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
578