Mitel SX-200 Documentation page 99

ATTENDANT TIME DISPLAY
Description
Each Attendant Console is equipped with a digital clock that con-
tinuously displays the time-of-day in hours and minutes. The time may
be displayed in 12- or 24-hour mode.
pulses derived from the CPU master clock. The fact that the clock is
on, is thus a direct indication that the CPU is running. The time
displayed by the clock is used by Automatic Wake-Up, Message Wait-
ing and Traffic Measurement.
Conditions
Feature Number 18 (Attendant Function) must be assigned an
l
access code. For the purpose of the following description, this is
assumed to be xc.
After a power failure, the clock will flash until the time has been
l
set.
Programming
If 12-hour time display is required, no clock options are required.
l
24-hour time display is required, select System Option 150
l If
(24-Hour Clock).
Operation
To set Time-of-Day:
Dial x5.
l
Dial the required hours.
l
Dial 2-digit minutes.
l
If time is PM (12-hour clock), press the x button.
l
Press the RELEASE button - the time is set and the clock con-
l
tinues to run.
SECTION MITL9105/'9110-096-I 05NA
The
clock display is driven by
Page 45