Mitel SX-200 Documentation page 619

SECTION MITL9105/911 o-096-31 5-NA
( f 1
(9)
a
l
l
l
0
5.05
type of Message Waiting indication can be employed by the f-
system at any time.
Message Registration can be provided for each room. This fea-
ture keeps count of all local calls made from a room. Flexible
charging allows the Message Register to be tailored to an
individual hotel's needs. By pressing the GUEST ROOM button
and entering the room number, the room number and message
"count" is displayed in the SOURCE display. The "count" can be
read on checkout for charging purposes; then under the same
conditions the register is cleared by pressing the ,#" button.
Figure 5-1 illustrates a typical display of this facility showing
the room number (303)' the Message Register total (29) and the
room status (3 - indicating that the room is vacant but requires
cleaning).
The foregoing facilities, and Message Registration are displayed
when the GUEST ROOM button is pressed and the room number
dialed. In brief these are:
The room number and the "MESSAGE REGISTER" status (see
Figure 5-l) in the SOURCE display.
"ROOM STATUS" indicated by a digit (followed by "." (period) if
the maid is in the room) in the DESTINATION display (see Figure
5-l).
The "DO NOT DISTURB" status (indicated by DO NOT DSTB
lamp).
The "MESSAGE WAITING" status (indicated by MSGE WAIT
lamp).
The "CONTROLLED OUTGOING RESTRICTION" status (indicated
by ROOM RESTR lamp).
CALL BLOCK: Rooms may be restricted from calling other
rooms for specific time periods. This restriction is controlled by
the attendant. When the console CALL BLOCK button is pressed, the
restriction is set up for calls (usually during the night period), and the
associated LED will light. Upon pressing the CALL BLOCK button again,
the restriction is lifted and the LED will be extinguished. Note that this
feature requires additional programming (see Section
MlTL9105/9! lo-096-105-NA).
Note: The button features described in paragraphs 5.06 and 5.07 are
alternative features. The system can be either programmed
with a "room status" facility (paragraph 5.06) or with a
"call-restrict" facility (paragraph 5.07), and the button an-
notated either as ROOM STATUS or ROOM RESTR, accord-
ingly. It should be noted that the "room status' facility may
still have the "call-restrict" function available, which is con-
trolled automatically by the status of the room.
Page 18