Mitel SX-200 Documentation page 395

SECTION MITL91 OS/91
STATION
Page 34
10-096-l 07-NA
CONFERENCE
Description
This feature allows a SUPERSET 4 user to set up a conference with up
to six conferees (plus the originating extension), without the assistance
of the attendant. The conferees may be any combination of extensions
and trunks. To originate a conference, a SUPERSET user first estab-
lishes a 2-party call, then adds on the remaining conferees. Any exten-
sion in the conference with an appropriate Class of Service may add
additional parties to the conference, to a maximum of seven. If the
originator encounters a busy or unanswered extension number, he may
return to the conference. If a CO trunk is to be added to the con-
ference and the number dialed is incorrect, busy, or unanswered, the
matically recalled to the conference. A call cannot be held or trans-
ferred by an extension in a conference.
Conditions
None
Operation
To Establish a Conference:
Establish a 2-party call.
l
Press the TRANSKONF
l
returned.
Dial the number of the next conferee - ringing tone is returned.
l
When the conferee answers, press the CONF feature button. A
3-party conference exists.
Any extension in the conference may add additional conferees to
l
the conference.
If the next conferee is busy or doesn't answer, press the CANCEL
l
feature button - the SUPERSET set is returned to the conference.
If the next conferee is to be accessed via a CO trunk and the
number dialed is incorrect, busy, or unanswered, press the CAN-
CEL feature button - the SUPERSET set is returned to the con-
ference.
feature button - transfer dial tone is
set is auto-