Mitel SX-200 Documentation page 625

SECTION MITL9105/911 o-096-31 5-NA
TABLE 5-3 (CONT'D)
ATTENDANT FUNCTION ACCESS CODES
To set up call forwarding:
a) Dial ~1 lnnn, where nnn is the
extension number of the forwarding
extension
b) Dial call forwarding code (l-4)
c) Dial mmm, where mmm is the number
to which the calls are to be forwarded
d) Press RELEASE button.
To enable the printer (see Note 3):
a) Dial *14#
b) Press RELEASE button.
To change the date:
a) Dial ~15 l- or 2-digit month, 2-digit
day, 2-digit year
b) Press RELEASE button.
To cancel call forwarding for an extension:
a) Dial *cl lnnn, where nnn is the
extension number of the forwarding
extension
b) Dial #
c) Press RELEASE button.
To display call forwarding set for an
extension:
a) Dial *cl lnnn, where nnn is the
extension number of the forwarding
extension
b) Press RELEASE button.
To cancel all call forwarding:
a) Dial *l# or xll##
b) Press RELEASE button.
To busy out an extension (see Note 3):
a) Dial *12nnn, where nnn is the number
of the extension to be busied-out
b) Dial *
c) Press RELEASE button.
To de-busy an extension (see Note 3):
a) Dial *12nnn, where nnn is the number
of the extension to be de-busied
b) Dial #
c) Press RELEASE button.
To suspend the printer (see Note 3):
a) Dial ~14~
b) Press RELEASE button.
To purge and ignore the printer (see Note
3):
a) Dial ~1400
b) Press RELEASE button.
To print the room register audit (see Notes
2 & 3):
a) Dial ~16
b) Press RELEASE button.
To change the system identity (see Note 3):
a) Dial *17nnn (l- to 3-digit ID, O-999)
b) Press RELEASE button.
To display current system identity:
a) Dial ~17
b) Press RELEASE button.
To print the "room status" audit (see Note
2):
a) Dial ~18
b) Press RELEASE button.
To print stored customer data (see Note 4):
a) Dial jc19 + n, where n is:
0 A complete print (see Note 5)
1 System Options, Feature Access
Codes, Classes of S.ervice, Hunt
Groups and Extensions
2 Trunk and Trunk Group Data
3 Special Set Data
4 Toll Control Data
5 Speed Call Data
6 Automatic Route Selection Data
x Systemwide Data (see Note 6)
b) Press RELEASE button.
Page 24