Mitel SX-200 Documentation page 314

SYSTEM IDENTIFIER
Description
This feature allows a unique identifier to be assigned to the system.
This code identifies the system when central polling equipment is used
for traffic data collection. It atso appears on the customer data dump.
Conditions
None
Programming
Select System Option= (System ID Enable).
l
Assign an access code to Feature Number 18 (Attendant Func-
l
tion), usually x as indicated under Operation.
Operation
To enter a New System identifier:
Dial ~17 - the system identifier is displayed in the console
l
SOURCE display - if an identifier is not assigned the display
shows 000.
Dial the new system identifier (any digit O-9).
l
Press the RELEASE button - the display clears.
l
To display the System Identifier:
Dial ~17 - the console SOURCE display shows the current sys-
l
tem identifier.
Press the RELEASE button -
l
SECTION MITL91 OS/91 10-096-l OS-NA
display clears.
the
Page 259