Mitel SX-200 Documentation page 573

Superswitch electronic private automatic branch exchange epabx
Hide thumbs Also See for SX-200:
Table of Contents

Advertisement

SECTION MITL91 OS/91 1 O-096-220-NA
Page 2
followed by the speed call entry access number assigned for that :
speed call number.
2.02
The foregoing overview is discussed in detail in the following
paragraphs. In addition, a simplified typical system is discussed
in paragraph 2.16, to which reference may be made while reading the
following
paragraphs.
System Speed Call Tables
2.03
There is only one type of system speed call table and it has the
following
characteristics:
It has the capacity of containing a maximum of 56 digits.
The table can contain a maximum of five separate speed call
l
numbers, each of any number of digits, provided that the total
number of digits does not exceed 56.
2.04
The tables may be programmed for use as:
(a) Common-use tables, whereby the attendant and selected sta-
tions may make use of the tables on a Class-of-Service basis
to dial calls external to the PABX. -
(b) Personal tables, which are dedicated for a selected station's
use.
Note:
The assignment of these tables is done at the time of pro-
gramming.
Table Assignments
2.05
Tables are assigned during programming (Part 3), for use as
common-use or personal tables. Those assigned for common
use may be accessed by the attendant, or by stations with the neces-
sary Class-of-Service Options (see paragraph 2.19). A personal table
may onty be accessed by the station which has been assigned that
table during programming. These table assignments are further dis-
cussed in the following paragraphs.
Common-Use Tables
2.06 Any station may access the speed call numbers in the
common-use tables, under the following conditions:
The station's Class of Service (COS) has the COS option (Table
l
2-2) which allows access to a particular common-use table.
number which is the same as that for a common-use table,
only the personal table will be accessed.
2.07
Speed call numbers for common-use tables are entered by the
attendant. These numbers may also be displayed or changed by
the attendant on the console, except for those numbers which have

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sx-100

Table of Contents