Mitel SX-200 Documentation page 43

10.09 The features which can be selected (e.g., Do Not Disturb) are
displayed adjacent to the alphanumeric display. The alphanu-
meric display instructs the user to "DIAL FEATURE NO.", which is a
reference to the number adjacent to the name of the feature .in the
features display. To select the feature, the user dials this number from
the keypad.
10.10 Speaker on/off. This button allows the set user to receive or
originate calls without use of the handset. Pressing the button
once switches the speaker and microphone on and selects the prime
line. Each time this button is pressed, the speaker and microphone are
switched alternately on and off, and the set is switched between on-
and off-hook conditions. While the microphone is on, a visual reminder
(MIC ON) is displayed on the features display.
10.11 Mic on/off. This button is used to switch the microphone off
during handsfree operation, in order to either prevent transmis-
sion of local sound, or improve reception when the set is installed in a
noisy environment. While the microphone is on, a visual reminder (MIC
ON) is displayed on the features display.
Line Status Display
10.12 This is a liquid crystal display mounted adjacent to the line
select buttons. The display contains 15 identical symbol groups;
. .
the symbols are aligned with the line select/speed call buttons.
10.13 The different states of a symbol group, and the meaning of
each state, are shown in Figure 10-Z.
Features Display i
10.14 This is a liquid crystal display mounted adjacent to the feature
buttons. The features display is divided into three functional
areas, as shown in Figure 10-3.
10.15 Features display area. The words displayed in this area in-
dicate the features that may be selected at any time. Those
features which are not in the Class of Service are not displayed.
Display of the words is initiated by pressing the display features key.
10.16 The meaning of each feature name is as follows:
1: FWD
Call Forward. This feature is automatically invoked after setting
up Call Forwarding type and destination. To cancel the feature,
the user must press the select features button, dial 'l', and then
press the OFF feature button. To reactivate the feature, the user
must press the select features button, dial 'I', and then press
the ON feature button. When active, the word FWD is displayed
as a reminder.
2: NO DIST'B
Do Not Disturb. Prevents an incoming call from. ringing the
SECTION MITL9105/9110-096-l OO-NA
Page 37