Mitel SX-200 Documentation page 234

MEET-ME CONFERENCE
Description
The Meet-Me Conference feature allows up to seven extensions to dial
the Meet-Me Conference access code at a specified time, and to be
connected into a conference. As each conferee joins the conference, a
single 200 ms burst of a 440 Hz tone is superimposed on the con-
ference. When a conference is full (seven conferees), parties trying to
enter the conference receive busy tone.
Conditions
A maximum of seven conferees may be in a conference.
l
Only one Meet-Me Conference may be active at any time.
l
Switchhook flash cannot be used by an extension in a Meet-Me
l
Conference - the extension will be dropped from the conference
upon flashing the switchhook.
The Attendant cannot dial into a Meet-Me Conference..
l
Only extensions and DISA trunks may access a Meet-Me Con-
l
ference.
Programming
All extensions accessing the feature must have Option Number
l
50 (Meet-Me Conference) specified in their COS.
Assign an access code to Feature Number 9 (Meet-Me Con-
l
ference). This access code must not conflict with the system
numbering plan.
Operation
Dial the Meet-Me Conference access code - if you are the first
l
person in the conference, you will hear music, if provided, or
nothing if Music on Hold is not provided. As each conferee joins
the conference, a warning tone is heard and the new conferee is
added to the conference.
the conference hears music if Music on Hold is provided.
SECTION MITLW 05/9110-096-l 05-NA
Page 179