Mitel SX-200 Documentation page 57

Customer Data Dump/Load
l
Diagnostics
Maintenance Function
l
Programming and Maintenance Security
l
Receiver - Busy-Out
Receiver - Direct Selection
l
Data Demultiplexer
Dialed Activity Reporting Terminal
(DART)
E&M Trunks
Ground Start Trunks
Loop Start Trunks
Recorded Announcement Cards (RACs)
Answer Supervision Detection
DID - Loop Dial Tie Trunks
Dial-In Tie Trunks
Dictation Trunks
Direct-In Lines
Direct inward Dial (DID) Trunks
Direct Inward System Access (DISA)
Failure Transfer
TABLE 2-l
MAINTENANCE FEATURES
l
l
TABLE 2-2
HARDWARE FEATURES
l
l
TABLE 2-3
TRUNK FEATURES
l
l
l
SECTION MITL9105/9110-096-105-NA
Remote System Reset Protection
Override
Reset the System
Speech Path - Busy-Out
Speech Path - Direct Selection
Test Line
Recorded Announcement Devices
Printer and Recording Devices
RMAT
Reserve Power Supply
220 V Operation
Ignore Reversal
Intercepts
Outgoing Audio Inhibit Until Answer
Supervision
Toll Reversal
Tie Trunks
Trunk Groups - Two Types
VNL - Trunks
Wait for Dial Tone
Page 3