Mitel SX-200 Documentation page 577

SECTION MITL9105/911
Page 6
Saved Number Redial
2.15 A saved number redial facility can exist only for a personal
table user. This attribute can only be added when programming,
and can only be used with a DTMF telephone. It is always held by the
last access number of the personal table. Only one number may be
stored for redial even though more than one table may be assigned to
the extension. When the attribute is programmed, the number of digits
available for the "saved" number are the digits remaining, after the
entries for the other telephone numbers in the table. Note that the
"saved" number includes one or more digits for trunk group access.
For further details refer to paragraphs 4.10 and 6.06.
Note: The Saved Number Redial facility can not
System Example
2.16 In order to illustrate the description of the Speed Call feature,
an example is given in Figure 2-l. This example should not be
considered typical, in that certain aspects have been emphasized to
illustrate all possible combinations which may occur under different
circumstances. These aspects are discussed with respect to the fol-
l o w i n g a r e a s :
Table Assignments
l
Speed Call Entry Access Numbers
COS Options
Class of Service.
l
2.17 The tables (as shown in Figure 2-l), are assigned as a mix of
common-use and personal tables. Tables 19 through 25 may be
used only as personal tables. Tables are assigned in pairs by means of
COS options (Table 2'2), when used as common-use tables, but are
separately assignable when used as personal tables; for example, Ta-
bles 18,24 and 25 are shown as assigned to Extension 403.
SPEED CALL TABLE COS OPTIONS
COS Option I
85
86
87
88
89
90
91
92
93
be
TABLE 2-2
Tables
1 a n d 2
3 a n d 4
5 a n d 6
7 a n d 8
9 a n d 10
11 a n d 12
13 a n d 14
15 and 16
17 a n d 18
used with ARS.