Mitel SX-200 Documentation page 285

SECTION MITL9105/911 O-096-105-NA
ROOM STATUS UPDATE (MAID IN ROOM)
Page 230
Description
This feature allows the Hotel/Motel Attendant to monitor, display and
change the status of a room. The functions which may be monitored
are:
Room Condition - Vacant and Clean (Status Code l), Occupied
l
and Clean (Status Code 2), Vacant and Needs Cleaning (Status
Code 3), and Occupied and Needs Cleaning (Status Code 4).
Location of the maids is displayed as a period (.) after the Room
l
Status code - i.e., each room the maid is .in will have a period
after.
Rooms having "deposit paid" are displayed as "d" after the Room
l
Status code.
Conditions
Trunk group access will be restricted in the Room Status 1 and 3
l
if System Option 258 (Controlled Outgoing Restriction Setup) has
been selected.
A Busy Lamp must be assigned to an extension for Room Status
l
to be displayed.
Room Restrict Button becomes Room Status Button when Room
l
Status is in use.
The following features are mutually exclusive:
NIGHT 2 facility and Room Status Display.
l
GUEST ROOM Button Enable and Attendant Serial Call.
l
Room Status and Attendant Serial Call.
l
Programming
System Option 258 (Controlled Outgoing Restriction Setup) may
l
be selected.
System Option 113 (GUEST ROOM Button Enable) must be en-
l
abled.
System Option 119 (Attendant ROOM STATUS Button Enable and
l
Display Enable) must be enabled.
The COS of the extension must include COS Option 80 (Room
l
Status Applies).
An access code must be assigned to Feature Number 28 ((Room
l
Status Update) Maid in Room) for updating of the room status by
the extensions.
Operation
To display the status of an individual room:
Press the GUEST ROOM button.
l