Mitel SX-200 Documentation page 755

. . . .
SECTION MITL91 W/91 lo-096~SOO-NA
TABLE 6-3 (CONT'D)
AlTENDANT FUNCTION ACCESS CODES
To set up call forwarding:
(a) Dial Xllnnn, where nnn is the
extension number of the forwarding
extension
(b) Dial call forwarding code (l-4)
(c) Dial mmm, where mmm is the number
to which the calls are to be forwarded
(d) Press RELEASE button.
To cancel call forwarding for an extension:
(a) Dial ~1 lnnn, where nnn is the
extension number of the forwarding
extension
(b) Dial #
(c) Press RELEASE button.
To display call forwarding set
for
an'
extension:
(a) Dial ~1 lnnn, where nnn
is
the
extension number of the forwarding
extension
(b) Press RELEASE button.
To cancel all call forwarding:
(a) Dial *l## or *ll#
(b) Press RELEASE button.
To busy out an extension
(Note 3):
(a) Dial jc12nnn. where nnn is the number
of the extension to be busied-out
(b) Dial ++
(c) Press RELEASE button.
To debusy an extension (Note 3):
(a) Dial jc12nnn, where nnn is the. number
of the extension
to
be debusied
(b) Dial #
(c) Press RELEASE button.
To suspend the printer (Note 3):
(a) Dial ~14~
(b) Press RELEASE button.
To purge and ignore the printer (Note 3):
(a) Dial ~1400
(b) Press RELEASE button.
To enable the printer (Note 3):
(a) Dial #14#
(b) Press RELEASE button.
To change the date:
(a) Dial ~15 and 3- or 4-digit date (l- or
2-digit month, 2-digit day)
(b) Press RELEASE button.
To print the room register audit (Notes 2 &
3):
(a) Dial ~16
(b) Press RELEASE button.
To change the system identity (Note 3):
(a) Dial *17nnn (l- to 3-digit ID, O-999)
(b) Press RELEASE button.
To display current system identity:
(a) Dial ~17
(b) Press RELEASE button.
To print the "room status" audit (Note 2):
(a) Dial ~18
(b) Press RELEASE button.
To print stored customer data (Note 4):
(a) Dial X19 + n, where n is:
0 A complete print (Note 5)
1 System Options, Feature Access
Codes, Classes of Service, Hunt
Groups and Extensions
2
Trunk and Trunk Group Data
3 Special Set Data
4 Toll Control Data
5 Speed Call Data
6 Automatic Route Selection Data
* Systemwide Data (Note 6)
(b) Press RELEASE button.
Page 50